| AQ-4105 Installation Instructions |
 |
|
|
 |
To install your Aquasana massaging wand, first remove the existing shower head from the filter unit. If you purchased your shower filter and wand together, you must first install the filter according to the AQ-4100 instructions until you have completed the flushing and activation step.
|
|
|
 |
Then, screw the shower wand holder to the filter unit. The holder should fit tightly on the filter unit with the hose outlet pointing down.
|
|
|
 |
Next, take one end of the shower hose and check to make sure the black rubber o-ring is in place on the hose nut.
|
|
|
 |
Then, take one of the black rubber washers and place it on top of the hose nut, using your finger to push the washer inside of the white, plastic threads on the hose nut cover.
|
|
|
 |
Once the washer is in place, screw the hose end into the hose outlet on the shower wand holder.
|
|
|
 |
Next, take the remaining hose end and place the black, rubber washer on top of the hose nut, making sure the washer sits securely inside of the white, plastic hose cover. Screw this hose end into the shower wand attachment.
|
|
|
 |
When the shower hand and hose are assembled, place the wand attachment in the holder.
|
|
|
 |
Once the installation is complete, you may adjust the shower wand to your desired pressure by turning the white swivel nozzle on the shower face.
|
